Transformer testing course continues, lesson #15 deals with measurement of zero-sequence impedance
Lesson #15 in the Balazs Sztari's Transformer Testing course is available for registration. It deals with zero-sequence impedance and will be held on May 29.
The 15th lesson in the Transformer Testing Course, authored and conducted by Balazs Sztari, is available for registration. Apply for free and join us in the live session on May 29, at 2pm CET!
The lesson is presented on the Master’s level and it deals with the zero-sequence impedance. The zero-sequence impedance on three-phase transformers is important for calculation of asymmetrical fault cases, therefore it is measured during factory acceptance tests. In this lesson you will learn how to perform this test and how to understand the results. We will discuss this important parameter for three-phase electrical network design and fault calculations. Join us and learn how to measure properly!
After the live broadcasting, the lesson stays available on demand.