Design of power transformers – e-lesson #12: Regulation concepts
Hosted by: Aleksandar Lojpur
This is lesson number 12 in the Design of power transformers course and also the opening lesson on Master's level. You can save your seat here.
Attend this session to learn about the following concepts:
• Constant flux voltage variation
• Variable flux voltage variation
• Indirect regulation
• Direct regulation
• Off-circuit / on-load regulation
• Linear, coarse-fine, reverting regulation, taps inside the winding
About the author
Aleksandar Lojpur
Aleksandar Lojpur is a Master of Electrical Engineering, having obtained the degree at the Faculty of Electrical Engineering and Computing at the University of Zagreb, Croatia.
In the period from 2014 to 2021 he performed the duty of Head of Electrical design at the Končar Power Transformers Ltd., a joint venture of Siemens Energy AG and Končar, while from 2019 to 2020 he was a lecturer at the Postgraduate Specialist Study in Transformers – Transformer Design at the University of Zagreb, Faculty of Electrical Engineering and Computing.
His most notable projects include 200 MVA autotransformer with phase shift regulation for Croatia; 560 MVA, 550 kV single phase autotransformer for USA; 1,000 MVA, 420 kV autotransformer for Norway; 240 MVA, 275 kV ester-filled autotransformer for the UK; 400 MVA, 245 kV split winding network transformer, SC-tested for the Netherlands.