Transformer testing course – e-lesson #5: No-load loss and current measurement
![Transformer testing course – e-lesson #5: No-load loss and current measurement Transformer testing course - lesson #5](https://transform.zgisoft.com/files/Transformer-testing-course-lesson-5-illustration-850-x-400-e1714725715744.jpg)
Hosted by: Balazs Sztari
No-load loss and no-load current measurements are elementary parts of every transformer factory acceptance test. These are very important and guaranteed parameters of the transformer, thus their correct and accurate measurement is essential.
In the fifth lesson of Transformer Testing Course, you will learn about the basics and techniques of these tests with the usual detailed explanations.
Learn about relevant standards, test and evaluation methods, and requirements for test equipment of no-load loss and current measurement of power transformers.
Keywords: power transformers, transformer testing, no-load loss, no-load current, measurement
Please, take our short survey at the registration. It will help improve the experience. Thank you!
Recommended browsers for the successful registration: Chrome, Edge, Mozilla, Safari
We strongly advise you to avoid using Internet Explorer, due to compatibility issues!
In order to ensure that your registration was successfully completed, please, after applying for the e-session, carefully check the inbox of the email account you are using. If you don’t see the confirmation email, please check your spam / junk folder as well. If the confirmation email is in that folder, please, move it to your inbox. This should eliminate any future issues with the registration process.
Also, we recommend checking firewall settings with your network provider.
To access the e-lesson, use the room link and the password provided in the confirmation email.
About the author
![Balazs Sztari](https://transform.zgisoft.com/files/Balasz-Sztari-300_x_300_pixel.jpg)
Balazs Sztari
CG Electric Systems HungaryBalazs Sztari is the head of Testing and Quality Control department at CG Electric Systems Hungary (formerly Ganz).
He joined the company in 1999 after he graduated as electrical engineer in Budapest. Beside of factory acceptance tests, his team performs commissioning, diagnostics and R&D tests on power transformers and rotating machines.
He is currently a member of Cigre A2.53 working group.
Balazs Sztari
CG Electric Systems Hungary